How to Remove Black Stains From Tile Grout
How to Remove Black Stains From Tile Grout
Dark grout lines can make a clean floor look dirty, but you rarely need harsh chemicals or a full regrout. Most black stains are ground-in dirt, soap scum, or surface mildew, and a simple baking soda mix often lifts them. Here’s how to mix the cleaner, scrub the lines, and keep them clean.
(Note: The photo shows a white powder going into a bucket of soapy water. It looks like baking soda, so I’ve used that. If the dark spots are mold, see Step 3.)
Step 1 — Mix a Baking Soda Cleaning Solution
What to do: Prepare a mild, gritty cleaner that lifts dirt without damaging the tile.
How to do it: Sweep or vacuum the floor first. In a bucket, mix 1/4 cup baking soda with 1 gallon of warm water and a few drops of dish soap, as shown in the photo. For heavily stained lines, make a thick paste with 3 parts baking soda to 1 part water instead.
Common mistake to avoid: Skipping the sweep. Loose grit turns into mud and scratches glossy tile.
Step 2 — Scrub the Grout Lines
What to do: Work the cleaner into the grout and let it sit.
How to do it: Apply the solution or paste along the grout lines and let it sit for 10 to 15 minutes. Scrub with a stiff nylon grout brush or an old toothbrush, following each line in small sections. Mop up the residue with clean water, then dry the floor with a towel so dirt doesn’t resettle.
Common mistake to avoid: Using a wire brush. It gouges grout, making it rougher and quicker to stain again.
Step 3 — Treat Stubborn Stains and Possible Mold
What to do: Step up the cleaning for lines that stay dark.
How to do it: Spray the stubborn areas with 3% hydrogen peroxide, or use an oxygen-based cleaner mixed per its label. Leave it for 10 minutes, scrub, and rinse. For mold in damp areas like bathrooms, improve ventilation and repeat the treatment. If the stains return, the grout may be worn or have moisture behind it, so regrouting may be the better fix.
Common mistake to avoid: Mixing cleaners. Never combine bleach with vinegar, ammonia, or peroxide, since the fumes can be toxic. Also, avoid vinegar on natural stone or cement-based grout, since the acid can eat away at it.






